Blasting Operations & Fragmentation Control

Start des Workflows/Prozesses.

Fetch existing borehole and rock density data from the Geological Data Model to determine fragmentation requirements.

Retrieve the predefined drilling pattern and burden/spacing parameters from the Blast Design entry.

Calculate the ratio of explosive mass to the volume of rock to be fragmented (kg/m³).

Calculate the allowed charge weight per delay to comply with vibration safety limits.

Generate a new Blast Plan record containing the calculated parameters, pattern geometry, and explosive types.

Create a task for the Drilling Supervisor to execute the pattern according to the retrieved design.

Create a task for the Blasting Crew to perform hole charging and stemming.

Update the Blast Plan entry with actual drilling depths and any deviations encountered during drilling.

Check available emulsion or ANFO stock levels in the Inventory Data Model.

Subtract the quantity of explosives used from the Inventory Data Model.

Assign the final detonation and firing task to the certified Blaster-in-Charge.

Send an email notification to the Safety Officer regarding the scheduled blast time and exclusion zone setup.

Send an SMS alert to all site personnel in the vicinity to clear the blast area.

Create a new entry to record post-blast fragmentation results (e.g., % of oversize, mean fragment size).

Aggregate all recent fragmentation analysis entries to find the average particle size trend.

Generate a comprehensive report comparing the planned powder factor vs. actual fragmentation results.

Update the master Blast Log with a quality score based on the fragmentation analysis.

Ende des Arbeitsablaufs/Prozesses.