ChecklistGuro logo ChecklistGuro Solutions Secteurs d'activité Ressources Tarifs

GPS/Precision Farming Equipment Calibration Checklist

Ensure accurate planting, spraying, and harvesting! Our GPS/Precision Farming Equipment Calibration Checklist helps optimize yields & minimize waste. Download now for detailed steps to calibrate your guidance systems, yield monitors, and more - boosting efficiency and maximizing your farm's potential. #precisionfarming #gps #agriculture #calibration #yieldmonitoring

Ce modèle a été installé 3 fois.

Style d'affichage

Pre-Calibration Assessment & Planning

1 of 7

Initial checks and planning before commencing any calibration procedures. This includes reviewing documentation, checking equipment health, and setting expectations.

Last Calibration Date

Brief Description of Equipment Usage Since Last Calibration

Equipment Type

Hours of Operation Since Last Calibration

Observed Issues or Concerns Prior to Calibration

Calibration Method

Upload Previous Calibration Records (if available)

GPS Receiver Calibration

2 of 7

Focuses on calibration specifically for the GPS receiver unit, including antenna alignment and error correction.

GPS Antenna Elevation Angle (Degrees)

GPS Receiver Firmware Version

Differential Correction Source (e.g., RTK, DGPS, WAAS)

Baseline Length (for RTK systems, in meters)

Notes on Initial Signal Strength & Satellite Visibility

Time Since Last Calibration (Days)

Antenna Connection Type

Date of Calibration

Guidance System Calibration (Steering/Implement)

3 of 7

Covers calibration of the steering system (if applicable) and the implement guidance system (e.g., planter, sprayer).

Steering System Offset (cm)

Implement Working Width (m)

Steering System Type

Implement Track Offset (cm)

Guidance Mode

Describe any observed steering drift or inaccuracies.

Last Calibration Date of Steering System

Implement Speed Calibration Factor

Variable Rate Application (VRA) Calibration

4 of 7

Specific calibration procedures for variable rate application equipment, including planter, sprayer, and fertilizer applicators.

Target Application Rate (lbs/acre or similar)

Ground Speed During Calibration (mph or km/h)

Calibration Flow Rate (gallons/minute or liters/minute)

Nozzle Spacing (inches or centimeters)

Application Method

Describe Calibration Procedure Followed (e.g., catch can method, simulated field)

Actual Application Rate (lbs/acre or similar) – Post Calibration

Calibration Adjustment Required?

Notes on Calibration Results & Adjustments Made

Sensor Calibration (Yield/Moisture/NDVI)

5 of 7

Focuses on calibration of any sensors integrated with the precision farming system (yield monitors, moisture sensors, NDVI sensors, etc.).

Yield Monitor Clean Grain Loss Percentage (Set Point)

Yield Monitor Moisture Setting (for grain type)

Yield Monitor Test Weight Setting

Describe the calibration procedure for the yield monitor (including grain standards used)

Moisture Sensor Calibration Factor (if adjustable)

Moisture Sensor Type (e.g., Capacitance, Dielectric)

NDVI Sensor Calibration Offset (if adjustable)

Record any observed anomalies during sensor calibration

Date of Sensor Calibration

Field Verification & Accuracy Testing

6 of 7

Post-calibration checks and verification in the field to ensure accuracy and performance.

Verification Field Location

Known Distance (e.g., Swath Width)

Measured Distance (GPS System)

Distance Error (Measured - Known)

Swath Overlap (if applicable)

Guidance Line Straightness Assessment (Visual)

Observations & Notes on Field Performance

Date of Field Verification

Overall Accuracy Result

Documentation & Record Keeping

7 of 7

Maintaining records of calibration dates, procedures, and results for future reference and troubleshooting.

Calibration Date

Calibration Start Time

0:00
0:15
0:30
0:45
1:00
1:15
1:30
1:45
2:00
2:15
2:30
2:45
3:00
3:15
3:30
3:45
4:00
4:15
4:30
4:45
5:00
5:15
5:30
5:45
6:00
6:15
6:30
6:45
7:00
7:15
7:30
7:45
8:00
8:15
8:30
8:45
9:00
9:15
9:30
9:45
10:00
10:15
10:30
10:45
11:00
11:15
11:30
11:45
12:00
12:15
12:30
12:45
13:00
13:15
13:30
13:45
14:00
14:15
14:30
14:45
15:00
15:15
15:30
15:45
16:00
16:15
16:30
16:45
17:00
17:15
17:30
17:45
18:00
18:15
18:30
18:45
19:00
19:15
19:30
19:45
20:00
20:15
20:30
20:45
21:00
21:15
21:30
21:45
22:00
22:15
22:30
22:45
23:00
23:15
23:30
23:45

Equipment Serial Number

Calibration Procedures Performed (Detailed Notes)

GPS Accuracy (Horizontal)

GPS Accuracy (Vertical)

Calibration Method Used

Notes/Observations

Calibration Data Files (e.g., logs, screenshots)

Calibrator Signature

Ce modèle de liste de contrôle vous a-t-il été utile ?

Démonstration de la solution de gestion de l'agriculture

Gérer une ferme ou une entreprise agricole est une tâche complexe. La plateforme Work OS de ChecklistGuro simplifie vos opérations, de la planification des cultures et de la gestion de l'irrigation au suivi du bétail et à la planification des récoltes. Augmentez l'efficacité, réduisez le gaspillage et améliorez les rendements ! Découvrez comment ChecklistGuro peut révolutionner votre entreprise agricole.

Modèles de liste de contrôle associés

Nous pouvons le faire ensemble

Besoin d'aide avec les listes de contrôle?

Vous avez une question ? Nous sommes là pour vous aider. Veuillez soumettre votre demande et nous vous répondrons rapidement.

E-mail
Comment pouvons-nous vous aider ?