Footing Formwork Inspection Checklist
Ensure stable foundations! Download our free Footing Formwork Inspection Checklist. Stay compliant, prevent costly errors, and guarantee structural integrity with this essential construction checklist for contractors & builders.
Ten szablon został zainstalowany 2 razy.
Pre-Pour Verification
Checks before concrete pouring to ensure proper preparation and safety.
Pour Date
Pour Time
Approved Pour Plan?
Concrete Strength (f'c)
Pour Plan Review Comments (if applicable)
Utilities Located and Marked?
Weather Forecast Review & Mitigation Plan (if needed)
Water Management Plan in Place?
Formwork Alignment & Dimensions
Verification of formwork position, level, and adherence to design specifications.
Footing Width (actual)
Footing Length (actual)
Footing Depth (actual)
Check of Level Deviation (max)
Formwork Alignment with Plan
Corner Alignment
Notes on Dimensional Discrepancies/Corrections Needed
Formwork Bracing & Support
Assessment of formwork stability and proper bracing to handle concrete pressure.
Spacing between Braces (Max)
Height of Formwork
Brace Condition
Bracing Type(s) Present
Formwork Stability Assessment
Comments on Bracing and Support
Formwork Materials & Condition
Inspection of formwork materials for defects, cleanliness, and proper treatment.
Formwork Moisture Content (%)
Formwork Material Type
Description of Formwork Condition (Cracks, Splits, etc.)
Presence of Oil/Grease on Formwork Surface
Formwork Treatment (if applicable)
Photos of Formwork Condition
Reinforcement Cover & Placement
Ensuring correct concrete cover over reinforcement and proper reinforcement placement within the formwork.
Minimum Concrete Cover (mm)
Measured Concrete Cover (mm) - Location 1
Measured Concrete Cover (mm) - Location 2
Measured Concrete Cover (mm) - Location 2
Rebar Tie Wire Secure?
Rebar Placement Issues?
Comments on Rebar Placement/Cover
Utilities & Obstructions
Confirmation that all utilities and obstructions are properly located and protected.
Are underground utilities identified and marked?
Utility Location Details (if applicable)
Are existing obstructions (e.g., rocks, debris) removed?
Details of any remaining obstructions and mitigation plans:
Utility Marking/As-Built Drawings (if available):
Distance from formwork to nearest utility (in feet/meters):
Weather Considerations
Assessment of weather conditions and their potential impact on the footing formwork.
Air Temperature (Current)
Wet-Bulb Temperature (Current)
Weather Forecast (Next 24 Hours)
Potential for Freezing?
Notes on Weather Impact/Mitigation
Safety & Access
Evaluation of safety measures and access points around the footing formwork.
Are appropriate PPE (Personal Protective Equipment) being used by all personnel?
Are barricades and warning signs in place around the work area?
Number of access points to the formwork?
Access route condition
Any observed safety concerns or hazards?
Inspector Signature
Czy ten szablon listy kontrolnej był pomocny?
Demo rozwiązania do zarządzania budową
Buduj mądrzej, a nie ciężej! ChecklistGuro usprawnia projekty budowlane, od planowania do zakończenia. Zarządzaj zadaniami, inspekcjami, procedurami bezpieczeństwa i więcej - wszystko w jednym miejscu. Zmniejsz opóźnienia, popraw komunikację i realizuj projekty na czas i w ramach budżetu.
Powiązane szablony list kontrolnych
Construction Material Inventory Checklist Template
Construction Material Inventory Tracking Checklist
Title Search & Insurance Checklist
Renovation Project Checklist
Roof Drainage System Inspection Checklist
Interior Painting Checklist
Lista dokumentów gwarancyjnych
Lista kontrolna instrukcji obsługi i konserwacji
Możemy to zrobić razem
Potrzebujesz pomocy z listami kontrolnymi?
Masz pytanie? Jesteśmy tu, aby pomóc. Prześlij zapytanie, a my szybko na nie odpowiemy.