Petroleum Drilling Operations Workflow

Начало на работния поток/процеса.

Retrieve technical parameters (depth, diameter, casing type) from the Wells Data Model.

Create a new data entry in the Drilling Logs model to track the 24-hour period.

Create a task for the designated Rig Supervisor to review the daily safety checklist.

Get current viscosity, density, and pH levels from the Fluids Data Model.

Calculate the drilling speed by comparing current depth against the previous depth entry.

Update the drill bit usage log with current hours drilled and visible wear level.

Aggregate all depth entries to find the current maximum depth reached.

Create a task for the Mud Engineer to execute and record a casing integrity pressure test.

Create an entry in the HSE (Health, Safety, Environment) model if any anomalies are detected.

Send an automated email summary of the daily drilling progress to the Drilling Manager.

Update the inventory count for drilling fluids and chemicals based on daily usage.

Execute formula: (Mud Density * True Vertical Depth) to ensure wellbore stability.

Aggregate all fluid loss entries to determine total volume lost to the formation.

Create a task for the outgoing and incoming Toolpusher to complete the handover checklist.

Generate a comprehensive PDF report summarizing the performance of the completed drilling section.

Send an emergency SMS alert to the On-Call Engineer if downhole pressure exceeds safety thresholds.

Delete an incorrectly recorded depth entry from the daily log if a mistake is identified.

Край на работния поток/процеса.