Farm Greenhouse Climate Control Process

Inicio del flujo de trabajo/proceso.

Retrieve current temperature, humidity, and CO2 levels from the Greenhouse Sensor Data Model.

Retrieve the configured target ranges (min/max) for climate parameters from the Configuration Data Model.

Calculate the difference between the current temperature and the target setpoint.

Calculate the difference between current humidity and the target humidity range.

Calculate the average temperature from all sensor entries recorded in the last 24 hours.

Update the Daily Climate Log entry with the latest aggregated sensor readings.

Create a new entry in the Alert Log if any sensor reading falls outside the allowed threshold.

Create a task for the Greenhouse Technician if a critical deviation (e. e.g. extreme heat) is detected.

Create a task for the Irrigation Specialist if soil moisture levels are below the threshold.

Send an email to the Greenhouse Manager when environmental parameters breach safety limits.

Send an SMS to the On-call Technician for immediate life-critical failures (e.g., heater failure in winter).

Update the status of the Ventilation Fan or Humidifier in the Equipment Data Model to 'Active' or 'Error'.

Create a summary report of all temperature, humidity, and CO2 fluctuations for the previous 24-hour period.

Create a recurring task for the maintenance team to calibrate sensors every 30 days.

Delete sensor data entries older than 90 days to optimize the Data Model performance.

Fin del flujo de trabajo/proceso.