ChecklistGuro Quality Assurance and Quality Control (QA/QC) Management
Streamline your pharmaceutical manufacturing with our end-to-end Quality Assurance and Quality Control (QA/QC) Management workflow. Ensure total regulatory compliance, optimize batch testing precision, and maintain rigorous GMP standards through automated monitoring, streamlined documentation, and proactive risk mitigation for uncompromised product integrity.
Este modelo foi instalado 3 vezes.
Começar
Início do fluxo de trabalho/processo.
1. Create Inspection Record
Initialize a new QA Inspection entry in the Inspection Data Model to track a new quality check event.
2. Assign Inspector
Create a task for the QA Technician to perform the physical inspection as defined in the inspection record.
3. Update Inspection Status
Update the status of the Inspection Entry to 'In Progress' once the inspector begins the task.
4. Fetch Product Specifications
Retrieve the required tolerance and dimension values from the Product Master Data Model for comparison.
5. Get Defect Log
Retrieve any existing historical defects associated with the specific batch/lot being inspected.
6. Calculate Variance
Execute a formula to calculate the difference between the measured value and the allowed tolerance.
7. Create Non-Conformance Report (NCR)
If a failure is detected, create a new entry in the Non-Conformance Data Model.
8. Assign Corrective Action
Create a task for the Production Manager to investigate the root cause of the non-conformance.
9. Update Inspection Result
Update the Inspection Entry with 'Pass' or 'Fail' based on the outcome of the check.
10. Calculate Batch Defect Rate
Aggregate all inspection entries for the current batch to calculate the percentage of failed units.
11. Notify Quality Manager
Send an email to the Quality Manager when a critical non-conformance is identified.
12. Alert Production Lead
Send an SMS alert to the Production Lead if the defect rate exceeds the predefined threshold.
13. Generate Daily QA Summary
Generate a summary report containing all completed inspections and identified defects for the day.
14. Close Non-Conformance
Update the NCR entry status to 'Closed' once all corrective actions are verified.
15. Remove Draft Inspection
Delete an incomplete or erroneous inspection entry that was created by mistake.
Fim
Fim do fluxo de trabalho/processo.
Início do fluxo de trabalho/processo.
Initialize a new QA Inspection entry in the Inspection Data Model to track a new quality check event.
Create a task for the QA Technician to perform the physical inspection as defined in the inspection record.
Update the status of the Inspection Entry to 'In Progress' once the inspector begins the task.
Retrieve the required tolerance and dimension values from the Product Master Data Model for comparison.
Retrieve any existing historical defects associated with the specific batch/lot being inspected.
Execute a formula to calculate the difference between the measured value and the allowed tolerance.
If a failure is detected, create a new entry in the Non-Conformance Data Model.
Create a task for the Production Manager to investigate the root cause of the non-conformance.
Update the Inspection Entry with 'Pass' or 'Fail' based on the outcome of the check.
Aggregate all inspection entries for the current batch to calculate the percentage of failed units.
Send an email to the Quality Manager when a critical non-conformance is identified.
Send an SMS alert to the Production Lead if the defect rate exceeds the predefined threshold.
Generate a summary report containing all completed inspections and identified defects for the day.
Update the NCR entry status to 'Closed' once all corrective actions are verified.
Delete an incomplete or erroneous inspection entry that was created by mistake.
Fim do fluxo de trabalho/processo.
Achou este modelo de fluxo de trabalho útil?
Demonstração da Solução de Gestão Farmacêutica
Como lidar com regulamentações complexas e garantir a qualidade na produção farmacêutica? A plataforma Work OS da ChecklistGuro otimiza os processos, desde a pesquisa e desenvolvimento até a produção, embalagem e distribuição. Mantenha a conformidade, melhore a eficiência e reduza os riscos. Descubra como a ChecklistGuro pode transformar as suas operações farmacêuticas!
Modelos de Fluxo de Trabalho Relacionados
Regulatory Submission Dossier Management
Environmental Monitoring and Cleanroom Control
Certificate of Analysis (CoA) Generation Process
Equipment Calibration and Maintenance Management
Formula Management and Recipe Control
Regulatory Labeling and Packaging Control
Contract Manufacturing Organization (CMO) Management
Inventory Management and Cold Chain Monitoring
Podemos fazer isso juntos.
Precisa de ajuda com o(a) Pharmaceutical?
Tem alguma dúvida? Estamos aqui para ajudar. Envie a sua questão e responderemos o mais breve possível.