Footing Formwork Inspection Checklist
Ensure stable foundations! Download our free Footing Formwork Inspection Checklist. Stay compliant, prevent costly errors, and guarantee structural integrity with this essential construction checklist for contractors & builders.
Този шаблон е инсталиран 2 пъти.
Pre-Pour Verification
Checks before concrete pouring to ensure proper preparation and safety.
Pour Date
Pour Time
Approved Pour Plan?
Concrete Strength (f'c)
Pour Plan Review Comments (if applicable)
Utilities Located and Marked?
Weather Forecast Review & Mitigation Plan (if needed)
Water Management Plan in Place?
Formwork Alignment & Dimensions
Verification of formwork position, level, and adherence to design specifications.
Footing Width (actual)
Footing Length (actual)
Footing Depth (actual)
Check of Level Deviation (max)
Formwork Alignment with Plan
Corner Alignment
Notes on Dimensional Discrepancies/Corrections Needed
Formwork Bracing & Support
Assessment of formwork stability and proper bracing to handle concrete pressure.
Spacing between Braces (Max)
Height of Formwork
Brace Condition
Bracing Type(s) Present
Formwork Stability Assessment
Comments on Bracing and Support
Formwork Materials & Condition
Inspection of formwork materials for defects, cleanliness, and proper treatment.
Formwork Moisture Content (%)
Formwork Material Type
Description of Formwork Condition (Cracks, Splits, etc.)
Presence of Oil/Grease on Formwork Surface
Formwork Treatment (if applicable)
Photos of Formwork Condition
Reinforcement Cover & Placement
Ensuring correct concrete cover over reinforcement and proper reinforcement placement within the formwork.
Minimum Concrete Cover (mm)
Measured Concrete Cover (mm) - Location 1
Measured Concrete Cover (mm) - Location 2
Measured Concrete Cover (mm) - Location 2
Rebar Tie Wire Secure?
Rebar Placement Issues?
Comments on Rebar Placement/Cover
Utilities & Obstructions
Confirmation that all utilities and obstructions are properly located and protected.
Are underground utilities identified and marked?
Utility Location Details (if applicable)
Are existing obstructions (e.g., rocks, debris) removed?
Details of any remaining obstructions and mitigation plans:
Utility Marking/As-Built Drawings (if available):
Distance from formwork to nearest utility (in feet/meters):
Weather Considerations
Assessment of weather conditions and their potential impact on the footing formwork.
Air Temperature (Current)
Wet-Bulb Temperature (Current)
Weather Forecast (Next 24 Hours)
Potential for Freezing?
Notes on Weather Impact/Mitigation
Safety & Access
Evaluation of safety measures and access points around the footing formwork.
Are appropriate PPE (Personal Protective Equipment) being used by all personnel?
Are barricades and warning signs in place around the work area?
Number of access points to the formwork?
Access route condition
Any observed safety concerns or hazards?
Inspector Signature
Намерихте ли този контролен списък полезен?
Демо на решение за управление на строителството
Строете по-умно, а не по-трудно! ChecklistGuro рационализира строителните проекти от планирането до завършването. Управлявайте задачи, инспекции, протоколи за безопасност и много други - всичко на едно място. Намалете закъсненията, подобрете комуникацията и доставяйте проекти навреме и в рамките на бюджета.
Свързани контролни списъци
Construction Material Inventory Checklist Template
Construction Material Inventory Tracking Checklist
Title Search & Insurance Checklist
Renovation Project Checklist
Roof Drainage System Inspection Checklist
Interior Painting Checklist
Списък с документи за гаранция
Списък за Ръководства за Експлоатация и Поддръжка (О&М)
Можем да го направим заедно
Нуждаете се от помощ с
Строителство?
Имате въпрос? Тук сме, за да помогнем. Моля, изпратете запитването си и ние ще отговорим своевременно.