Environmental Monitoring and Cleanroom Control

Начало на работния поток/процеса.

Create a new entry in the 'Monitoring Session' data model to track the start of a cleanroom audit.

Assign a task to the Technician to manually verify that all particle counters and humidity sensors are operational.

Get the most recent calibration date from the 'Equipment' data model to ensure sensors are within valid range.

Calculate the difference between the current reading and the established cleanroom baseline for particle count.

Update the active Monitoring Session entry with the newly captured temperature, pressure, and humidity values.

Aggregate all entries from the last 24 hours to find the average particle concentration.

Compare the current aggregated particle count against the maximum allowed limit defined in the safety protocol.

Trigger a high-priority task for the Cleaning Crew if a threshold breach is detected.

Send an automated email to the Facility Manager if environmental parameters fall outside of regulated limits.

Send an urgent SMS to the On-call Supervisor if a critical pressure loss is detected in the cleanroom.

Create a formatted PDF report summarizing all environmental readings and any deviations recorded during the session.

Delete temporary sensor data entries that have exceeded the data retention policy period.

Update the 'Equipment' data model to mark a sensor as 'Out of Service' if it fails the physical check.

Край на работния поток/процеса.