Automotive Battery Testing and Replacement Workflow

Начало на работния поток/процеса.

Fetch previous battery replacement dates and voltage logs for the specific vehicle ID.

Create a new entry in the 'Battery Test Log' data model to start the testing process.

Assign a task to a technician to measure the battery's CCA performance.

Assign a checklist task to inspect battery terminals for oxidation or debris.

Update the Test Record with the recorded voltage measurements during the test.

Execute formula: (Measured_CCA / Rated_CCA) * 100 to determine battery health percentage.

Aggregate all voltage readings from the multi-stage load test to find the average drop.

Update the battery entry status to 'Passed', 'Failed', or 'Requires Replacement' based on test results.

If status is 'Failed', create a task for the mechanic to remove the old battery and install a new one.

Create a new entry in the 'Inventory Outbound' model to track the new battery serial number usage.

Send an email to the customer detailing the battery test findings and the recommendation.

Send an SMS to the manager if a battery failure is detected that requires urgent parts ordering.

Generate a PDF report containing the full test metrics, timestamp, and technician signature.

Update the master Vehicle Service entry to reflect that the battery service is completed.

Delete transient sensor raw data entries once the final aggregated results are saved.

Край на работния поток/процеса.