Bolting Inspection Checklist

BOLTING INSPECTION CHECKLIST Created by ChecklistGuro (https://checklistguro.com) --- GENERAL INFORMATION --- [ ] Inspection Date [ ] Inspection Time [ ] Project Name [ ] Location [ ] Inspector Name [ ] Inspector ID [ ] Company Name --- PROJECT IDENTIFICATION --- [ ] Project Name [ ] Project Location [ ] Contractor [ ] Client [ ] Inspection Date [ ] Drawing/Design Revision [ ] Bolting Specification Reference [ ] Specific Location of Bolts Inspected --- BOLT IDENTIFICATION & SPECIFICATION --- [ ] Bolt Diameter (inches/mm) [ ] Bolt Grade/Strength (A307, A325, A490, Other (Specify in Long Text)) [ ] Bolt Material (e.g., Carbon Steel, Alloy Steel) [ ] Number of Bolts Inspected [ ] Specific Bolt Specification Reference (e.g., AWS D1.1, Project Specification) [ ] Bolt Type (Hex Head, Stud, J-Bolt, Other (Specify in Long Text)) [ ] Bolt Length (inches/mm) --- PRE-INSTALLATION INSPECTION --- [ ] Bolt Diameter (inches/mm) [ ] Bolt Grade (A325, A36, A490, Other (Specify)) [ ] If 'Other' Grade Selected, Specify: [ ] Bolt Coating Type (Plain, Galvanized, Zinc-Alum, Other (Specify)) [ ] If 'Other' Coating Selected, Specify: [ ] Thread Condition (Good, Slightly Damaged, Damaged, Severely Damaged) [ ] Notes on Thread Condition (if applicable) [ ] Upload Photo of Bolt (optional) [ ] Quantity of Bolts Inspected --- TORQUE APPLICATION VERIFICATION --- [ ] Target Torque Value (kNm/lb-ft) [ ] Actual Torque Value Recorded (kNm/lb-ft) [ ] Torque Application Method (Impact Wrench, Torque Wrench (Click), Torque Multiplier, Other (Specify)) [ ] Details Regarding Torque Application Method (e.g., Wrench Calibration, Technique) [ ] Torque Units (kNm, lb-ft) [ ] Number of Turns (If Applicable) [ ] Calibration Status of Torque Equipment (Within Calibration Period, Outside Calibration Period - Record Deviation) [ ] Notes on Calibration Status/Deviation (if applicable) --- VISUAL INSPECTION - INSTALLED BOLTS --- [ ] Bolt Head Condition (No Damage, Minor Damage (Cosmetic), Significant Damage (Cracks, Deformation), Damaged - Requires Replacement, Unsure - Further Evaluation Needed) [ ] Thread Condition (Clean & Intact, Minor Debris, Galling Present, Thread Damage/Stripping, Unsure) [ ] Number of Bolts with Visible Corrosion (Estimate) [ ] Detailed Description of Any Visible Defects [ ] Was Proper Washer Used? (Yes, No, Not Applicable, Unsure) [ ] Location of Significant Bolt Defects (e.g., Grid Coordinates) [ ] Upload Photos of Significant Bolt Defects (optional) --- CORROSION & COATING ASSESSMENT --- [ ] Coating Type (Galvanized, Painted, Chrome, None) [ ] Coating Thickness (mm) [ ] Coating Condition (Excellent, Good, Fair, Poor) [ ] Description of Corrosion (if any) [ ] Percentage of Bolt Surface Corroded (%) [ ] Corrosion Photos (if applicable) [ ] Rust Severity (None, Light, Moderate, Severe) --- GALLING & DAMAGE ASSESSMENT --- [ ] Evidence of Galling Observed? (No, Minor, Moderate, Severe) [ ] Describe any Galling Observed (Location, Severity, etc.) [ ] Visible Thread Damage? (No, Minor Damage, Moderate Damage, Severe Damage - Recommend Replacement) [ ] Describe any Thread Damage Observed (Type, Location, Severity) [ ] Number of Bolts with Thread Damage [ ] Evidence of Bolt Head Damage? (No, Minor Deformation, Cracking, Significant Damage - Recommend Replacement) [ ] Describe Bolt Head Damage (Location, Type, Severity) [ ] Upload Photo of Galling/Damage (if applicable) --- DOCUMENTATION & SIGN-OFF --- [ ] Inspection Date [ ] Inspection Time [ ] Inspector Name [ ] Inspector Certification/License Number [ ] Summary of Findings & Recommendations [ ] Number of Bolts Inspected [ ] Inspection Status (Pass, Fail, Conditional Pass, Requires Further Investigation) [ ] Inspector Signature [ ] Supporting Documentation (Photos, Torque Records) --- END OF TEMPLATE --- Transform this text into a digital, automated, and trackable mobile app! Visit: https://checklistguro.com/templates/construction/bolting-inspection-checklist (Click "Install Template" to launch your digital inspection tool immediately)