Calibration Checklist
Download our free Calibration Checklist Excel template to streamline your processes, ensure accuracy, and boost team productivity with ChecklistGuro workflows.
| Label | Value | Notes |
|---|---|---|
| Created by checklistguro.com | ||
| Equipment Identification & Information (STEP) | ||
| Equipment Name/Description (TEXT) | ||
| Manufacturer (TEXT) | ||
| Model Number (TEXT) | ||
| Serial Number (TEXT) | ||
| Asset Tag Number (NUMBER) | ||
| Date of Last Calibration (DATE) | ||
| Next Calibration Due Date (DATE) | ||
| Location (SELECTION options: Production Line 1, Production Line 2, Quality Control, Warehouse, Other) | ||
| Any previous issues or notes? (TEXT) | ||
| Environmental Conditions (STEP) | ||
| Ambient Temperature (°C) (NUMBER) | ||
| Ambient Temperature (°F) (NUMBER) | ||
| Relative Humidity (%) (NUMBER) | ||
| Air Pressure (kPa) (NUMBER) | ||
| Date of Environmental Measurement (DATE) | ||
| Time of Environmental Measurement (DATE) | ||
| Notes on Environmental Conditions (e.g., drafts, unusual fluctuations) (TEXT) | ||
| Calibration Standards (STEP) | ||
| Standard Serial Number (NUMBER) | ||
| Standard Uncertainty (k=2) (NUMBER) | ||
| Standard Traceability (e.g., NIST, ISO) (SELECTION options: NIST, ISO, Other (Specify)) | ||
| Traceability Details (Specify originating standard) (TEXT) | ||
| Standard Calibration Due Date (DATE) | ||
| Standard Calibration Certificate (UPLOAD) | ||
| Standard Condition (As Received) (SELECTION options: Within Tolerance, Out of Tolerance, Unknown) | ||
| Preliminary Checks & Warm-up (STEP) | ||
| Equipment Serial Number (NUMBER) | ||
| Visual Inspection Notes (damage, cleanliness, etc.) (TEXT) | ||
| Power Supply Condition (SELECTION options: Nominal, Low, High, Unstable) | ||
| Warm-up Time (minutes) (NUMBER) | ||
| Warm-up Start Time (DATE) | ||
| Initial Readings / Baseline Measurements (before full calibration) (TEXT) | ||
| Equipment Stability Check - Pass/Fail (SELECTION options: Pass, Fail) | ||
| Calibration Procedure (STEP) | ||
| Procedure Step 1: Initial Setting & Zeroing (TEXT) | ||
| Span Adjustment Value (if applicable) (NUMBER) | ||
| Zero Adjustment Value (if applicable) (NUMBER) | ||
| Calibration Method Used (e.g., Relative, Absolute) (SELECTION options: Relative, Absolute, Other (Specify)) | ||
| Notes on Procedure Execution (e.g., any deviations from standard) (TEXT) | ||
| Number of Readings Taken (NUMBER) | ||
| Calibration Points Used (SELECTION options: 0% Span, 25% Span, 50% Span, 75% Span, 100% Span, Other (Specify)) | ||
| Attach Calibration Graph (if applicable) (UPLOAD) | ||
| Data Acquisition & Recording (STEP) | ||
| Measurement 1 Reading (NUMBER) | ||
| Measurement 2 Reading (NUMBER) | ||
| Measurement 3 Reading (NUMBER) | ||
| Ambient Temperature (°C) (NUMBER) | ||
| Ambient Humidity (%) (NUMBER) | ||
| Date of Measurement (DATE) | ||
| Time of Measurement (DATE) | ||
| Notes/Observations During Measurement (TEXT) | ||
| Measurement Unit (SELECTION options: mm, cm, m, inch) | ||
| Tolerance Evaluation (STEP) | ||
| Measured Value 1 (NUMBER) | ||
| Tolerance Upper Limit (Value 1) (NUMBER) | ||
| Tolerance Lower Limit (Value 1) (NUMBER) | ||
| Result of Value 1 (Within Tolerance?) (SELECTION options: Yes, No, Not Applicable) | ||
| Explanation/Comments (if Value 1 is out of tolerance) (TEXT) | ||
| Measured Value 2 (NUMBER) | ||
| Result of Value 2 (Within Tolerance?) (SELECTION options: Yes, No, Not Applicable) | ||
| Explanation/Comments (if Value 2 is out of tolerance) (TEXT) | ||
| Adjustment & Correction (If Required) (STEP) | ||
| Detailed Description of Adjustment(s) Performed (TEXT) | ||
| Adjustment Value 1 (e.g., Offset) (NUMBER) | ||
| Adjustment Value 2 (e.g., Gain) (NUMBER) | ||
| Adjustment Method Used (e.g., Software, Manual) (SELECTION options: Software Adjustment, Manual Adjustment, Other (Specify)) | ||
| If 'Other' selected above, please specify the adjustment method. (TEXT) | ||
| Number of Adjustment Cycles (NUMBER) | ||
| Confirmation of Adjustment Stability (SELECTION options: Stable after 1 cycle, Stable after 2 cycles, Stable after 3+ cycles, Unstable - Further investigation required) | ||
| Date of Adjustment (DATE) | ||
| Time of Adjustment (DATE) | ||
| Technician Signature (Adjustment Confirmation) (SIGNATURE) | ||
| Final Verification (STEP) | ||
| Span Value (Post-Adjustment) (NUMBER) | ||
| Zero Value (Post-Adjustment) (NUMBER) | ||
| Linearity Error (Max) (NUMBER) | ||
| Repeatability Error (Max) (NUMBER) | ||
| Pass/Fail Result (SELECTION options: Pass, Fail) | ||
| Comments / Observations (If Applicable) (TEXT) | ||
| Date of Final Verification (DATE) | ||
| Time of Final Verification (DATE) | ||
| Technician Signature (SIGNATURE) | ||
| Calibration Certificate & Documentation (STEP) | ||
| Certificate Number (NUMBER) | ||
| Calibration Date (DATE) | ||
| Next Calibration Due Date (DATE) | ||
| Equipment Name (TEXT) | ||
| Equipment Model (TEXT) | ||
| Equipment Serial Number (TEXT) | ||
| Calibration Results Summary (TEXT) | ||
| Calibration Data Files (UPLOAD) | ||
| Calibration Technician Signature (SIGNATURE) | ||
| Equipment Return & Tagging (STEP) | ||
| Return Location (LOCATION) | ||
| Equipment Tag Number (Pre-Calibration) (TEXT) | ||
| Equipment Tag Number (Post-Calibration) (TEXT) | ||
| Return Date (DATE) | ||
| Return Time (DATE) | ||
| Condition Upon Return (SELECTION options: Clean, Slightly Dirty, Dirty, Damaged) | ||
| Notes on Return/Condition (TEXT) | ||
| Technician Signature (SIGNATURE) |
Found this Media helpful?
