Concrete Pour Readiness Checklist: Formwork, Reinforcement & Quality Control

CONCRETE POUR READINESS CHECKLIST: FORMWORK, REINFORCEMENT & QUALITY CONTROL Created by ChecklistGuro (https://checklistguro.com) --- FORMWORK INSPECTION --- [ ] Formwork Alignment Deviation (mm) [ ] Tie Spacing (mm) [ ] Formwork Condition (Excellent, Good, Fair, Poor) [ ] Detailed Formwork Condition Notes [ ] Bracing Adequacy (Adequate, Insufficient, Not Present) [ ] Formwork Photo Documentation --- REINFORCEMENT PLACEMENT --- [ ] Bar Size (Diameter in inches) [ ] Spacing Between Bars (in inches) [ ] Concrete Cover (in inches) [ ] Bar Grade Verification (e.g., ASTM A615) (Grade 60, Grade 50, Grade 75, Other (Specify in Long Text)) [ ] Notes on Bar Placement or Adjustments [ ] Tie Wire Type (Aluminum, Galvanized Steel) [ ] Bar Location Correctness (Correct, Incorrect - Needs Adjustment) --- SUBGRADE PREPARATION --- [ ] Subgrade Compaction Factor (%) [ ] Moisture Content (%) [ ] Description of Subgrade Condition [ ] Soil Type (Clay, Sand, Gravel, Silt, Loam) [ ] Subgrade Photo Documentation [ ] Level of Debris (None, Minor, Moderate, Significant) --- WEATHER CONDITIONS --- [ ] Ambient Temperature (°C) [ ] Concrete Temperature (°C) [ ] Wind Conditions (Calm, Light Breeze, Moderate Wind, High Wind) [ ] Precipitation (None, Light Rain, Moderate Rain, Heavy Rain, Snow) [ ] Date of Weather Observation [ ] Time of Weather Observation --- MATERIAL VERIFICATION --- [ ] Concrete Slump (inches) [ ] Ambient Temperature (°F) [ ] Air Temperature (°F) [ ] Concrete Mix Design Confirmed? (Yes, No) [ ] Water Quality Verified? (Yes, No) [ ] Concrete Batch Ticket [ ] Notes on Materials --- EQUIPMENT READINESS --- [ ] Pump Flow Rate (GPM) [ ] Vibrator Frequency (Hz) [ ] Finishing Tools Condition (Excellent, Good, Fair, Poor) [ ] Last Maintenance Date (Pump) [ ] Estimated Pour Start Time [ ] Fuel Level (Generator/Pump) (Full, 75%, 50%, 25%, Empty) [ ] Equipment Photos (Pre-pour) --- SAFETY PROTOCOL --- [ ] PPE Availability (Check all that apply) (Hard Hats, Safety Glasses, Gloves, High-Visibility Vests, Steel-Toed Boots) [ ] Number of Safety Barriers Present [ ] Location of First Aid Kit [ ] Date of Last Safety Briefing [ ] Safety Signage Adequacy (Adequate, Needs Improvement, Insufficient) [ ] Any Observed Safety Hazards? [ ] Safety Observer Signature --- END OF TEMPLATE --- Transform this text into a digital, automated, and trackable mobile app! Visit: https://checklistguro.com/templates/construction/concrete-pour-readiness-checklist-formwork-reinforcement-quality-control (Click "Install Template" to launch your digital inspection tool immediately)