ChecklistGuro logo ChecklistGuro Solutions Industries Company Pricing

LNG Facility Safety & Inspection Checklist

Ensure peak performance & minimize risk with our comprehensive LNG Facility Safety & Inspection Checklist. Streamline your operations, maintain regulatory compliance, and protect your valuable assets. Download now for a safer, more efficient LNG facility.

This Template was installed 0 times.

Pre-Operation Checks

1 of 10

Verification of systems and equipment before facility startup.

Planned Startup Date

Scheduled Startup Time

Ambient Temperature (Celsius)

Wind Speed (m/s)

Weather Conditions

Pre-Startup Checklist Review Notes

Operator Signature - Pre-Startup Verification

Tank & Vessel Inspections

2 of 10

Detailed examination of storage tanks and vessels for structural integrity and leak detection.

Tank Wall Thickness (mm)

Tank Pressure (kPa)

Corrosion Observations

Crack or Weld Defect Notes

Level Gauge Status

Tank Inspection Photos

Last Internal Inspection Date

Vessel Material Type

Pipeline Integrity

3 of 10

Assessment of pipeline condition, including corrosion monitoring, leak detection, and pressure testing.

Pipeline Operating Pressure (PSI)

Pipeline Wall Thickness (inches)

Pipeline Material Type

Last Internal Inspection Date

Time of Inspection Start

Corrosion Rate (mm/year)

Pigging Frequency (Months)

GPS Coordinates of Inspection Location

Fire Protection Systems

4 of 10

Inspection of fire suppression systems, fire detection equipment, and emergency response procedures.

Fire Water Tank Level (Gallons)

Fire Pump Condition

Last Fire Extinguisher Inspection Date

Sprinkler System Valve Status

Fire Hose Pressure (PSI)

Fire Alarm Panel Status

Comments/Observations Regarding Fire Protection Systems

Gas Detection & Monitoring

5 of 10

Verification of gas detectors, monitoring systems, and alarm functionality.

Methane Concentration (ppm)

Hydrogen Sulfide Concentration (ppm)

Ambient Temperature (°C)

Detector Calibration Status

Last Calibration Date

Time of Reading

Detector Location(s) Checked

Detector Malfunction/Alarm Notes

Electrical Safety

6 of 10

Inspection of electrical equipment, grounding systems, and hazard mitigation measures.

Voltage Reading (Phase A)

Voltage Reading (Phase B)

Voltage Reading (Phase C)

Grounding System Condition

Potential Hazards Observed

Notes on Electrical Equipment Condition

Last Electrical Inspection Date

Inspector Signature

Security Systems

7 of 10

Assessment of security perimeters, access controls, and surveillance equipment.

Perimeter Fence Height (meters)

CCTV System Status

Access Control Points Checked

Last Intrusion Detection System Test Date

Time of Security Patrol Start

Location of Security Control Room

Personnel Training & Competency

8 of 10

Verification of employee certifications, training records, and emergency response drills.

Last Hazmat Training Date

Last Emergency Response Drill Date

Number of Hours of LNG Handling Training

Relevant Certifications

Trainee Signature

Training Deficiencies Noted (if any)

Environmental Compliance

9 of 10

Review of emissions monitoring, spill prevention plans, and waste management practices.

Last Emissions Monitoring Date

Methane Emission Levels (ppm)

Spill Prevention Plan Status

Summary of Recent Environmental Audits

Environmental Monitoring Reports

Waste Management Plan Compliance

Post-Operation Checks

10 of 10

Verification of system shutdown procedures and final equipment checks.

Shutdown Completion Time

Final Tank Pressure (psia)

All Systems Verified Offline?

Date of Last Shutdown

Abnormalities/Observations During Shutdown

Operator Signature (Confirmation of Shutdown)

We can do it Together

Need help with Checklists?

Have a question? We're here to help. Please submit your inquiry, and we'll respond promptly.

Email Address
How can we help?